Defi Advance BFs are electronic blacked out gauges which are high response and refined design. When the car is off they have a black face with no numbers on them.
The Defi ADVANCE BF series is Defi's latest and most progressive development in gauge technology to date. Defi Advance BF gauges utilize Defi's next generation, Defi-Link Advance Control Unit (required for installation) for ultra precise monitoring and interaction.
Defi ADVANCE BF gauges are designed around an ultra accurate microprocessor controlled stepping motor that will self calibrate each time. The microcontroller calibrates up to 270 degree angle in 3027 - 4600 segments (0.088 - 0.059 ), and provides accurate vehicle information even in the most demanding of vehicles.
The Defi ADVANCE BF system has adpoted an interactive communication system with the control box allowing for data to be sent to and from each unit for warnings, peak values and constant high speed reactive data to be fed to each individual gauge via the Defi-Link. Due to this interactive system, the Defi-Link ADVANCE BF system is not compatible with the older BF Meter series.
Defi have incorporated a flat glass front and clearer value gradiaton in the gauge face for more accuracy and higher visibility in any condition.
Interactive communication advanced system is implemented.
Flat glass and precise graduation scale give more needle accuracy and high visibility.
LOW mount back case(11% down over currently in use)
Flat glass adopted
Gauges can be controlled from distance with the included switch unit.
Opening and closing modes can be selected from 2 variations.
The installation of additional gauges is easy. Just connect it with the other two gauges and attach the wire to Advance Control Unit.
The illumination color can be chosen from white, amber red, and blue.
*The illumination colour cannot be changed.
The needle pointer driven by original stepping motor has a smooth instantaneous response to rapid acceleration of high performance vehicles.
Brightness can be adjusted by selecting from five levels for daytime and night time separately.
(night time dimming cancellation function is available.)
The microcontroller calibrates up to 270 degree angle in 3027 - 4600 segments (0.088 - 0.059 ), and provides accurate vehicle information.
Self-diagnosis system turns the warning LED on to indicate any wire disconnection, short circuit and serial communication errors.
Warning by buzzer sound when the warning LED is on (buzzer sound can be turned on / off).
Peak value and warning value during driving are stored. Driving data can be stored and replayed up to 3 minutes.
With both fuel pressure gauge and turbo installed, differential pressure can be monitored on the fuel pressure gauge screen.
ADVANCE Controller needed
Not Compatible with BF Series
12V Vehicles ONLY
Defi Advance BF Tacho/REV 0-9000 RPM Gauge 60mm AmberRed Illumination