Deatschwerks 1300cc Fuel Injectors Civic/Integra/Accord 02-10 K Series K20/K24 / CRZ ZF1 / S2000 F22 06-09

Models

- Civic 07-10 H/B
- Civic 07-09 4dr Saloon
- Accord
- Accord 03+ Saloon / Tourer
- Accord 08+ Saloon / Tourer
- Integra
- Deatschwerks
- Civic
- Civic 02-06 hb inc Type R
- HONDA CR-Z
- Integra 01-06
- S2000
- S2000 04-09
- CR-V
- CR-V 02-06

Deatschwerks take a unique approach to building our high flow injectors. Other fuel injection companies offer only a couple different styles of injectors and leave fitting them up to the customer. At Deatschwerks every injector they produce is a drop-in fitment for its application. Their injectors are engineered to fit your OEM harness, OEM fuel rail and OEM manifold (see diagram below).



All Deatschwerks   high flow fuel injectors are built using only quality OEM cores. In addition, each set is balanced to within a 2% flow variation. This means better fitment, easier tuning, and increased reliability. Deatschwerks back all of their products with a comprehensive 12-month warranty.

Most aftermarket injectors go straight from the production line to the shipping department. At Deatschwerks, they have added what they consider a crucial step of flow balancing and quality assurance testing on EVERY set of injectors they produce - not just one or two from each lot. Over 40 data points are collected and analyzed on each injector to be sure customers only receive the best end product. All testing is performed in-house on a custom built New Age Technologies injector flow bench.

Below is a brief outline of some of the testing:


6-point coil test

Leak testing from 0-100psi

RPM Ramp 500-10,000 rpm

Pulse Width Ramp 0.5-17ms

Spray pattern analysis (open and pulsed)


Detailed High Performance Flow Report

Every set of Deatschwerks injectors is accompanied by a full color injector report This comprehensive report contains information on your specific injectors that is critical to the high performance tuner such as...


Fuel pressure flow rate conversions

cc/min and lbs/hr conversions

BSFC based horsepower maximims

System balance and flow variance


All DeatschWerks injectors feature the following:


E85 compatibility

Flow rates and set balancing in-house by DeatschWerks

Flow balanced to within 1-2% (flow report included)

Excellent spray pattern and atomization for optimized idle and tuning

3-year comprehensive warranty





Fuel Pressure Range

40-80 psi



Minimum Pulse Width

1.4



Maximum Duty Cycle

91%



Coil Impedance

12.9 ohm



Injector Type

Denso Top Feed



Connector Type

us-car




Nominal Static Flow Rate




PSI >

43

58

70

80

90

100



cc/min

1371

1573

1722

1799

1878

2051



lb/hr

130.6

179.8

164.0

171.3

178.9

195.3




Please note: Flow rates listed are the nominal (normal minimum) rates for this injector part number. All sets are flow balanced. For actual flow rates of your set, please refer to the flow report that will accompany your order.
SKU: 21U-01-1300-4
£475.00 Delivery - POA